Metrohm 815 Robotic Soliprep for LC User Manual
815 robotic soliprep for lc
Table of contents
Document Outline
- Table of contents
- 1 Introduction
- 2 Installation
- 2.1 Preparing the Sample Processor
- 2.2 Installing MagIC Net™
- 2.3 Configuring the Swing Heads
- 2.4 Mounting the Swing Heads
- 2.5 Mounting the deflector, Luer connector and collection container
- 2.6 Mounting the transfer robotic arm
- 2.7 Mounting the Polytron robotic arm
- 2.8 Washing station and drip pan
- 2.9 Connecting and setting up the peristaltic pump
- 2.10 Setting up the rinsing tubings
- 2.11 Opening guide chain
- 2.12 Assembling and mounting the Polytron® drive
- 2.13 Mounting the rinsing tubings for the Polytron®
- 2.14 Connecting the Polytron®
- 2.15 Mounting the safety shield
- 2.16 Installing the Dosino
- 2.17 Equipping the rack
- 3 Defining rack positions
- 4 Adjusting rack and robotic arm
- 5 Setting lift positions
- 6 Controlling the Polytron®
- 7 Accessories
- Index