Metrohm 746 VA Trace Analyzer - Manual (Page 468)

6.2 Preparations before start of a determination
746 VA Trace Analyzer / 747 VA Stand
6-5
6.2.3 Method-independent settings
Depending on the method selected and before the start of a definition, in addition
to the parameters defined on the method dialog pages other method-independent
parameter settings are needed on other dialog pages:
• MONITORING (see section 5.5.1)
Run mode Run mode (determination, calibration or test)
User name Optional entry of the user name
Stand address Entry of the stand address (1, 2 or 3)
Auto.samples Automatic transfer of sample data from the
"SAMPLES" page
Auto.batch Automatic series determination of the specified
number of samples
Det.storage Automatic storage of determinations
Sample data Pos. , Ident.1/S1 , Ident.2/S2 , Ident.3/S3 ,
Method.call , Sample size/S0 (see also section
6.2.2)
• SAMPLES (see section 5.4.4)
Entry of sample data if these should be transferred automatically to the
"MONITORING" page (with Auto.samples = on ).
• DOSIMATS (see section 5.3.3)
Setting of parameters for 685 Dosimats and 700 Dosinos used for the auto-
matic addition of standard addition or auxiliary solutions.
• SOLUTIONS (see section 5.3.4)
Definition of standard addition and auxiliary solutions which should be added
automatically with the 685 Dosimats and 700 Dosinos or with the 695 Auto-
sampler.
Before the start of a determination, ensure that all solutions defined in the
method for automatic dispensing are entered on this page and that these
solutions are located in the correct positions on the Dosimats or the Auto-
sampler.
• COMMON VARIABLES (see section 5.4.5)
Definition of variables common to all methods.