Displaying clients – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 98
77
Table 26 Field description
Field Description
Status
Connection status:
•
Discovery—The AC only receives discovery packets from the AP.
•
Join—The AP fails to connect with the AC due to tunnel failure.
•
Run—The AP has successfully connected with the AC, and the AP
is running.
•
Offline—The AP has successfully connected with the AC, but the
AP is offline.
Time
The meaning of this field varies with the connection status of the AP:
•
Discovery—Last time the AC received a discovery request.
•
Join—Last time the AC received a Join packet.
•
Run—Time when the AP entered the Run state.
•
Offline—Time when the AP went offline.
Displaying clients
Select Summary > Client from the navigation tree.
Figure 41 Displaying clients
Table 27 Field description
Field Description
Refresh
Refresh the current page.
Add to Blacklist
Add the selected client to the static blacklist, which you can display by
selecting Security > Filter from the navigation tree.
Reset Statistic
Clear statistics of the specified client.
Disconnect
Log off the selected client.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module