Inter-ac roaming configuration example, Network requirements, Inter-ac roaming, see – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 488
467
Intra-AC roam association appears in the Roam Status field.
Figure 507 Verifying intra-AC roaming
Inter-AC roaming configuration example
Network requirements
As shown in
, two ACs that each are connected to an AP are connected through a Layer 2
switch. Both ACs are in the same network. The IP address of AC 1 is 192.168.1.100 and that of AC 2 is
192.168.1.101 A client associates with AP 1.
Configure inter-AC roaming so that the client can associate with AP 2 when roaming to it.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module