H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 142)

121
POS
CPOS
Serial
MP-group
• Depending on the device model, you can configure these types of ports as the monitor port:
Layer 2 Ethernet
Layer 3 Ethernet
Tunnel
• To ensure correct operation of your device, do not enable STP, MSTP, or RSTP on the monitor port.
• On some types of devices, you can configure a member port in link aggregation as the monitor
port.
• Other restrictions on the monitor port depend on your device model.
• You can configure multiple mirroring ports, but only one monitor port for a mirroring group.
• A port can be assigned to only one mirroring group.
Recommended configuration procedure
Task Remarks
Add a mirroring group
Required.
Select the mirroring group type Local from the Type list.
Configure the mirroring ports
Required.
During configuration, select the port type Mirror Port.
For more information, see "
Configuring ports for a mirroring group ."
Configure the monitor port
Required.
During configuration, select the port type Monitor Port.
For more information, see "
Configuring ports for a mirroring group ."
Adding a mirroring group
1. Select Device > Port Mirroring from the navigation tree.
2. Click the Add tab.
The page for adding a mirroring group appears.