Configuring the dns server, Figure 206 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 257
236
name resolution. The IP address of the DNS server is 2.1.1.2/16 and the DNS server has a com domain,
which stores the mapping between domain name host and IP address 3.1.1.1/16.
AC serves as a DNS client, and uses dynamic domain name resolution and the suffix to access the host
with the domain name host.com and the IP address 3.1.1.1/16.
Figure 206 Network diagram
NOTE:
•
Before performing the following configuration, make sure the AC and the host are reachable to each
another, and the IP addresses of the interfaces are configured. See
•
This configuration varies by DNS servers. The following configuration is performed on a PC running
Windows Server 2000.
Configuring the DNS server
1.
Create zone com:
a.
Select Start > Programs > Administrative Tools > DNS.
b.
As shown in
, right click Forward Lookup Zones and select New Zone.
c.
Follow the instructions to create a new zone named com.
Figure 207 Creating a zone
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module