H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 380)

359
Figure 341 Configuring mac and psk port security
Table 128 Configuration items
Item Description
Port Mode
mac and psk: MAC-based authentication must be performed on access
users first. If MAC-based authentication succeeds, an access user is
required to use the pre-configured PSK to negotiate with the device.
Access to the port is allowed only after the negotiation succeeds.
Select Wireless Service > Access Service from the navigation tree, click
MAC Authentication List, and enter the MAC address of the client.
Max User
Control the maximum number of users allowed to access the network
through the port.
MAC Authentication Select MAC Authentication.
Domain
Select an existing domain from the list.
The default domain is system. To create a domain, select Authentication >
AAA from the navigation tree, click the Domain Setup tab, and enter a
new domain name in the Domain Name field.
• The selected domain name applies to only the current wireless service,
and all clients accessing the wireless service use this domain for
authentication, authorization, and accounting.
• Do not delete a domain name in use. Otherwise, the clients that access
the wireless service will be logged out.
Preshared Key
• pass-phrase—Enter a PSK in the form of a character string. You must
enter a string that can be displayed and consists of 8 to 63 characters.
• raw-key—Enter a PSK in the form of a hexadecimal number. You must
enter a valid 64-bit hexadecimal number.
b. Configure psk.