H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 314
293
Figure 278 Adding a static address mapping
3.
Configure static NAT for an interface:
a.
Click Add in the Interface Static Translation area.
b.
Select Vlan-interface2 for Interface Name, as shown in
.
c.
Click Apply.
Figure 279 Configuring static NAT for an interface
4.
Configure an internal WINS server:
a.
Select Network > NAT > Internal Server from the navigation tree.
b.
Click the Internal Server tab.
c.
Click Add in the Internal Server area.
d.
Click Advanced Configuration.
e.
Select Vlan-interface2 for Interface.
f.
Select 17(UDP) for Protocol Type.
g.
Enter 5.5.5.10 as the external IP address and 137 as the global port.
h.
Enter 192.168.1.2 as the internal IP address and 137 as the internal port.
i.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module