Figure 102, Boxes, as shown in – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 163

142
d.
Click Apply.
Figure 102 Enabling SNMP agent
2.
Configure an SNMP read-only community:
a.
Click the Community tab.
b.
Click Add.
c.
Enter public in the Community Name field and select Read only from the Access Right list, as
shown in
.
d.
Click Apply.
Figure 103 Creating an SNMP read-only community
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module