H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 655)

634
Figure 676 Configuring user isolation
3. Configure user isolation as described in Table 204 .
Table 204 Configuration items
Item Description
VLAN ID Specify the VLAN in which user isolation is enabled.
AccessMAC
Specify the MAC addresses to be permitted by the AC. For more information, see
"
After user isolation is enabled ."
• Enter a MAC address in the field next to the Add button.
• Click Add to add the MAC address to the permitted MAC list.
• To delete a MAC address from the list, select an entry and click Delete.
IMPORTANT:
• Broadcast or multicast MAC addresses cannot be specified as permitted
MAC addresses.
• Up to 16 permitted MAC addresses can be configured for one VLAN.
4. Click Apply.
To avoid network disruption caused by user isolation, add the MAC address of the gateway to the
permitted MAC address list, and then enable user isolation.
If you configure user isolation for a super VLAN, the configuration does not take effect on the sub-VLANs
in the super VLAN, and you must configure user isolation on the sub-VLANs if needed.
Displaying user isolation information
Select Security > User Isolation from the navigation tree to enter the page displaying user isolation
configuration summary.