Configuring 802.1x on a port, Configuring, 1x on a port – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 543
522
IMPORTANT:
Do not change the timer parameters of global 802.1X from their default values unless you have
determined that the changes would better the interaction process.
Configuring 802.1X on a port
1.
From the navigation tree, select Authentication > 802.1X to enter the page, as shown in
.
The Ports With 802.1X Enabled area shows the 802.1X configuration on ports.
2.
Click Add.
Figure 555 802.1X configuration on a port
3.
Configure 802.1X features on a port, as described in
.
4.
Click Apply.
Table 168 Configuration items
Item Description
Port
Select the port to be enabled with 802.1X authentication. Only 802.1X-disabled ports
are available.
802.1X configuration takes effect on ports only when 802.1X is enabled both globally
and on the ports.
NOTE:
802.1X is mutually exclusive with the link aggregation group or service loopback group
configuration on a port.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module