H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 172
151
Figure 115 Loopback test configuration page
2.
Configure the loopback test parameters as described in
.
Table 59 Configuration items
Item Description
Testing
type
External
Set the loopback test type to External or Internal.
Support for the test type depends on the device model.
Internal
3.
Click Test to start the loopback test.
After the test is completed, the test result appears in the Result box.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module