Configuring authorization, Methods for the isp domain – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 575
554
Configuring authorization methods for the ISP
domain
1.
From the navigation tree, select Authentication > AAA.
2.
Click the Authorization tab to enter the authorization method configuration page.
Figure 582 Authorization method configuration page
3.
Configure authorization methods for different types of users in the domain, as described in
.
4.
Click Apply.
A configuration progress dialog box appears.
5.
After the configuration progress is complete, click Close.
Table 179 Configuration items
Item Description
Select an ISP domain
Select the ISP domain for which you want to specify authorization methods.
Default AuthZ
Name
Secondary Method
Configure the default authorization method and secondary authorization method for
all types of users.
Options include:
•
HWTACACS—HWTACACS authorization. You must specify the HWTACACS
scheme to be used.
•
Local—Local authorization.
•
None—This method trusts all users and assigns default rights to them.
•
RADIUS—RADIUS authorization. You must specify the RADIUS scheme to be used.
•
Not Set—The device uses the default authorization setting, which is local
authorization.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module