H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 851)

830
Figure 884 Adding an IKE DPD detector
4. Configure the IKE DPD parameters, as described in Table 271 .
5. Click Apply.
Table 271 Configuration items
Item Description
DPD Name Enter a name for the IKE DPD.
DPD Query Triggering Interval
Enter the interval after which DPD is triggered if no IPsec protected packets is
received from the peer.
DPD Packet Retransmission
Interval Enter the interval after which DPD packet retransmission will occur if no DPD
response is received.
Configuring an IKE peer
1. From the navigation tree, select VPN > IKE.
2. Click the Peer tab.
The IKE peer list page appears.
Figure 885 IKE peer list
3. Click Add.
The Add IKE Peer page appears.