H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 446
425
Figure 445 Enabling remote AP
7.
Bind an AP radio to the wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click the
icon for the wireless service dot1x.
c.
Select the box for the AP with the radio mode 802.11n(2.4GHz).
d.
Click Bind.
Figure 446 Binding an AP radio to a wireless service
8.
Enable 802.11n(2.4GHz) radio:
a.
Select Radio > Radio from the navigation tree.
b.
Select the box for the AP with the radio mode 802.11n(2.4GHz).
c.
Click Enable.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module