H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 760)

739
Table 248 Configuration items
Item Remarks
Max Denial Count
Maximum denial count of client association requests.
If a client has been denied more than the specified maximum times, the AP
considers that the client is unable to associate with any other APs and accepts
the association request from the client.
RSSI Threshold
Load balancing RSSI threshold.
A client may be detected by multiple APs. An AP considers a client whose RSSI
is lower than the load balancing RSSI threshold to be not detected. If only one AP
can detect the client, the AP increases the access probability for the client even
if it is overloaded.
Configuring AP
Upgrading AP version
1. Select Advanced > AP from the navigation tree.
2. On the AP Module tab, select Enable.
3. Click Apply.
NOTE:
You can configure the version upgrade function on the Advanced > AP Setting, AP > AP Group, and AP >
AP Setting pages to upgrade a single AP, a group of APs, and all APs as needed. See
Upgrading APs .
Figure 770 Upgrading AP version
Configuring the AC to accept APs with a different software version
1. Select Advanced > AP from the navigation tree.
2. On the AP Module tab, select the desired AP.
3. Click Version Set.
4. Configure AP settings as described in Table 249 .
5. Click Apply.
Table 249 Configuration items
Item Description
AP Model Display the selected AP model.