H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 579
558
b.
Click Add.
c.
Enter telnet as the username.
d.
Enter abcd as the password.
e.
Enter abcd again to confirm the password.
f.
Select Reversible for password encryption.
g.
Select Common User as the user type.
h.
Select Configure as the level.
i.
Select Telnet as the service type.
j.
Click Apply.
Figure 585 Configuring the local user
2.
Configure ISP domain test:
a.
From the navigation tree, select Authentication > AAA.
The Domain Setup page appears, as shown in
.
b.
Enter test as the domain name.
c.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module