Configuring 1+n ac backup, Configuring an ap connection priority – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 752
731
Table 242 Field description
Field Description
AP Name
Display the AP connecting to the AC.
Status
Current status of the AC.
Vlan ID
ID of the VLAN to which the port belongs.
Domain ID
Domain to which the AC belongs.
Link State
Link status of the AC connection:
•
Close—No connection is established.
•
Init—The connection is being set up.
•
Connect—The connection has been established.
Peer Board MAC
MAC address of the peer AC.
Peer Board State
Status of the peer AC.
•
Normal—The peer AC is normal.
•
Abnormal—The peer AC is malfunctioning.
•
Unknown—No connection is present.
Hello Interval
Heartbeat interval for an AC connection.
Configuring 1+N AC backup
Configuring an AP connection priority
1.
Select AP > AP Setup from the navigation tree.
2.
Click the icon
for the target AP.
3.
Expand Advanced Setup to enter the page as shown in
4.
Configure a connection priority as described in
.
5.
Click Apply.
Configuring 1+N AC backup
1.
Select AP > AP Setup from the navigation tree.
2.
Click the
icon for the target AP.
3.
Expand Advanced Setup.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module