Creating a static arp entry, Figure 134 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 189
168
Figure 134 Displaying ARP entries
Creating a static ARP entry
1.
From the navigation tree, select Network > ARP Management.
The default ARP Table page appears, as shown in
2.
Click Add .
The New Static ARP Entry page appears.
Figure 135 Adding a static ARP entry
3.
Configure the static ARP entry, as described in
.
4.
Click Apply.
Table 64 Configuration items
Item Description
IP Address
Enter an IP address for the static ARP entry.
MAC Address
Enter a MAC address for the static ARP entry.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module