H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 720)

699
5. Click Apply.
Table 234 Configuration items
Item Description
WLAN ID Display the selected WLAN ID.
Wireless Service Select an existing wireless service.
Direction
Set the traffic direction:
• Inbound—Traffic from client to AP.
• Outbound—Traffic from AP to client.
Mode
Set a rate limiting mode:
• Static—Limits the rate of each client to a fixed value.
• Dynamic—Limits the rate of a client to the configured total rate/the number of
online clients.
Rate
Set the rate of the clients.
• If you select the static mode, Per-Client Rate is displayed, and the rate is the rate
of each client.
• If you select the dynamic mode, Total Rate is displayed, and the rate is the total
rate of all clients.
Setting radio-based client rate limiting
You can configure the access controller to limit client rates for a radio.
To set radio-based client rate limiting:
1. Select QoS > Wireless QoS from the navigation tree on the left.
2. Click the Client Rate Limit tab.
3. Click Add in the Radio-Based Configuration area.