H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 809)

788
Figure 823 Configuring AP version upgrade (2)
4. Download the AP version to the AC. (Details not shown.)
5. Upgrade the AC's version to B108D001 and reset the AC. AP 1 and AP 2 will try to establish
tunnels with the AC of the new version:
AP 1 and AP 2 compare their versions with that the version of the AC, download the AP version
B108D001 from the AC and restart. After reboot, they use version B108D001 to establish
LWAPP tunnels with the AC.
AP 3 does not compare its version with the AC, and uses version B106D001 to establish an
LWAPP tunnel with the AC.
Verifying the configuration
1. Select Summary > AP from the navigation tree.
2. On the page that appears, click the Detail tab, and click the target AP name.
You can see that versions of AP 1 and AP 2 are B108D001, and the version of AP 3 remains as
B106D001.