Verifying the configuration, Local mac authentication configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 404: Configuring the ac
383
Figure 372 The client is associated with the AP
Verifying the configuration
•
The client can successfully associate with the AP and access the WLAN network.
•
You can view the online clients on the page you enter by selecting Summary > Client from the
navigation tree.
Local MAC authentication configuration example
Network requirements
AC is connected to AP through a Layer 2 switch, and they are in the same network. Perform MAC
authentication on the client.
Figure 373 Network diagram
Configuring the AC
1.
Create an AP:
a.
Select AP > AP Setup from the navigation tree.
b.
Click Add.
c.
On the page that appears, set the AP name to ap, select the AP model WA3628i-AGN, select
Manual from the Serial ID list, enter the AP serial ID, and click Apply.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module