Ping operation, Ipv4 ping operation – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 278
257
Ping operation
IPv4 ping operation
1.
From the navigation tree, select Diagnostic Tools > Ping.
The IPv4 Ping configuration page appears.
2.
Click the expansion button before Advanced Setup to display the configurations of the advanced
parameters of IPv4 ping operation.
Figure 230 IPv4 ping configuration page
3.
In the Destination IP address or host name field, enter the IPv4 address or host name of the
destination device.
4.
Set the advanced parameters for the IPv4 ping operation.
5.
Click Start to execute the ping command.
6.
View the result in the Summary field.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module