Downloading a file, Uploading a file, Removing a file – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 129: Specifying the main boot file
108
Downloading a file
1.
Select Device > File Management from the navigation tree.
The page in
appears.
2.
Select a file from the list.
You can select one file at a time.
3.
Click Download File.
The File Download dialog box appears. You can select to open the file or to save the file to a
specified path.
Uploading a file
IMPORTANT:
H3C recommends that you do not perform any operation on the Web interface during the upgrade
procedure.
1.
Select Device > File Management from the navigation tree.
The page in
appears.
2.
Select the disk to save the file in the Upload File box.
3.
Click Browse to set the path and name of the file.
4.
Click Apply.
Removing a file
1.
Select Device > File Management from the navigation tree.
The page in
appears.
2.
Select one or multiple files from the file list,
3.
Click Remove File.
NOTE:
You can also remove a file by clicking the
icon.
Specifying the main boot file
1.
Select Device > File Management from the navigation tree.
The page in
appears.
2.
Select the box to the left of an application file (with the extension of .bin or .app).
You can set one file at a time.
3.
Click Set as Main Boot File to set the main boot file to be used at the next startup.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module