H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 249)

228
Table 88 Field description for local ports
Field Description
Unit Member device ID in an IRF.
Port Port where LACP is enabled.
LACP State State of LACP on the port.
Port Priority LACP priority of the port.
State
Active state of the port. If a port is Selected, its state is active and the ID of the
aggregation group it belongs to will be displayed.
Inactive Reason
Reason code indicating why a port is inactive (or Unselected) for
receiving/transmitting user data. For the meanings of the reason codes, see
the bottom of the page shown in Figure 197 .
Partner Port Name of the peer port.
Partner Port State
State information of the peer port:
• A—Indicates that LACP is enabled.
• B—Indicates that LACP short timeout has occurred. If B does not appear, it
—Indicates that LACP long timeout has occurred.
• C—Indicates that the link is considered aggregatable by the sending
system.
• D—Indicates that the link is considered as synchronized by the sending
system.
• E—Indicates that the sending system considers that collection of incoming
frames is enabled on the link.
• F—Indicates that the sending system considers that distribution of outgoing
frames is enabled on the link.
• G—Indicates that the receive state machine of the sending system is using
the default operational partner information.
• H—Indicates that the receive state machine of the sending system is in
expired state.
Oper Key Operational key of the local port.
Table 89 Field description for peer ports
Field Description
Unit Number of the partner system.
Port Name of the peer port.
Partner ID LACP priority and MAC address of the partner system.
Partner Port Priority LACP priority of the peer port.
Partner Oper Key Operational key of the peer port.