H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 124)

103
3. Configure the log host as described in Table 41 .
4. Click Apply.
Table 41 Configuration items
Item Description
IPv4/Domain
Set the IPv4 address, domain name, or IPv6 address of the log host.
You can specify up to four log hosts.
IPv6
Loghost IP/Domain
Setting buffer capacity and refresh interval
1. Select Device > Syslog from the navigation tree.
2. Click the Log Setup tab.
The syslog configuration page appears.
Figure 64 Syslog configuration page
3. Configure buffer capacity and refresh interval as described in Table 42 .
4. Click Apply.
Table 42 Configuration items
Item Description
Buffer Capacity Set the number of logs that can be stored in the log buffer of the Web interface.
Refresh Interval
Set the refresh period on the log information displayed on the Web interface.
You can select manual refresh or automatic refresh:
• Manual—Click Refresh to refresh the Web interface when displaying log
information.
• Automatic—You can select to refresh the Web interface every 1, 5, or 10 minutes.