H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 292)

271
Figure 244 Adding static address mapping
3. Configure a static address mapping, as described in Table 100 .
4. Click Apply.
Table 100 Configuration items
Item Description
Internal IP Address Enter an internal IP address for the static address mapping.
Global IP Address Enter a public IP address for the static address mapping.
Mask Enter a mask for the IP address.
ACL Enter an ACL ID for the static address mapping.
Enabling static NAT on an interface
1. From the navigation tree, select Network > NAT, and click Static NAT.
The Static NAT page appears, as shown in
Figure 243 .
2. In the Interface Static Translation area, click Add.
The page for enabling interface static translation appears.
Figure 245 Enabling interface static translation
3. Enable static NAT on an interface, as described in Table 101 .