Configuring a security policy – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 932
911
Item Description
Second-Time
Authentication
Method
Select an authentication method as the second-time authentication method.
Ask password again
on the second
authentication
With this item selected, the system provides the login page and asks a user for a
password again after the user passes the first authentication. If you do not select this
item, the system automatically uses the password for the first authentication for the
second authentication.
IMPORTANT:
This function takes effect only when you enable full customization of the user interface and
the customized user interface can provide a login page twice.
Configuring a security policy
Insecure user hosts may bring potential security threats to the internal network. Configure security policies
for the SSL VPN system so that when a user logs in, the SSL VPN system checks the user host's operating
systems, browsers, antivirus software, firewall software, files and processes, and determines which
resources to provide for the user according to the check result.
A security policy defines multiple check categories, each of which contains multiple check rules. To pass
the check of a category, a host must satisfy at least one rule of the category. To pass the check of a
security policy, a host must satisfy all categories of the policy.
1.
Select SSL VPN > Configure Security Policy from the navigation tree.
The security policy list page appears, as shown in
Figure 975 Security policies
2.
Click Add to add a new security policy.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module