H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 429)

408
Figure 419 Network diagram
Configuration procedure
1. Assign an IP address for the AC:
See "
Assign an IP address to the AC: ."
2. Configure a RADIUS scheme:
See "
Configure a RADIUS scheme ."
3. Configure AAA:
See "
Configure AAA ."
4. Configure the AP:
See "
Create an AP ."
5. Create a wireless service:
a. Select Wireless Service > Access Service from the navigation tree.
b. Click Add.
c. On the page that appears, set the service name to dot1x, select the wireless service type
Crypto, and click Apply.
Figure 420 Creating a wireless service
6. Configure 802.1X authentication:
After you create a wireless service, the wireless service configuration page appears.
a. In the Security Setup area, select Open-System from the Authentication Type list.
b. Select Encryption, and select Enable from the Provide Key Automatically list.
c. Select the Cipher Suite box, select CCMP from the Cipher Suite list, and select WPA2 from the
Security IE list.
d. Select the Port Set box, and select userlogin-secure-ext from the Port Mode list.
e. Select system from the Mandatory Domain list.
f. Select EAP from the Authentication Method list.