Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 346
325
Figure 310 Enabling 802.11gn radio
6.
Enable auto AP:
a.
Select AP > Auto AP from the navigation tree.
b.
Select Enable from the Auto AP list.
c.
Click Apply.
Figure 311 Configuring auto AP
d.
After enabling auto AP, click Refresh to view the auto AP.
Figure 312 Viewing the auto AP
Verifying the configuration
•
Select AP > AP Setup from the navigation tree.
You can see that the AP is in run state.
•
The client can successfully associate with the AP and access the WLAN network.
•
You can view the online clients on the page you enter by selecting Summary > Client from the
navigation tree.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module