Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 730
709
5.
Click the
icon in the Operation column for 802.11n (5 GHz) to enter the page for setting
guaranteed bandwidth, as shown in
.
6.
Set the guaranteed bandwidth:
a.
Set the guaranteed bandwidth percent to 80 for wireless service research.
b.
Set the guaranteed bandwidth percent to 20 for wireless service office.
c.
Set the guaranteed bandwidth percent to 0 for wireless service entertain.
7.
Click Apply.
After you apply the guaranteed bandwidth settings, the page for enabling bandwidth guarantee
appears, as shown in
Figure 741 Setting guaranteed bandwidth
8.
Select the option specific to 802.11n(5GHz).
9.
Click Enable.
Figure 742 Enabling bandwidth guarantee
Verifying the configuration
•
Send traffic from the AP to the three wireless clients at a rate lower than 30000 kbps. The rate of
traffic from the AP to the three wireless clients is not limited.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module