Figure 3 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 317
296
Figure 282 Configuring an Ethernet interface
3.
Configure the Ethernet interface, as described in
.
Table 104 Configuration items (auto mode)
Item Description
WAN Interface
Displays the name of the Ethernet interface to be configured.
Interface Status
Display and set the interface status:
•
Connected—Indicating that the current interface is up and connected, click
Disable to shut down the interface.
•
Not connected—Indicating that the current interface is up, but not
connected, click Disable to shut down the interface.
•
Administratively Down—Indicating that the current interface is shut down by
a network administrator, click Enable to bring up the interface.
Connect Mode: Auto
Select Auto as the connection mode. The interface will get an IP address
automatically.
Table 105 Configuration items (manual mode)
Item Description
WAN Interface
Displays the name of the Ethernet interface to be configured.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module