H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 666)

645
To configure an Ethernet frame header ACL:
Step Remarks
1. Adding a time range
Optional.
A rule referencing a time range takes effect only
during the specified time range.
2. Add an Ethernet frame header ACL
Required.
For more information, see "
Adding an ACL ."
3. Configuring a rule for an Ethernet frame header
ACL
Required.
Recommended WLAN-AP ACL configuration procedure
WLAN-AP ACLs match APs based on MAC addresses or serial IDs of APs.
To configure a WLAN-AP ACL:
Step Remarks
1. Adding a time range
Optional.
A rule referencing a time range takes effect only
during the specified time range.
2. Add a WLAN-AP ACL
Required.
For more information, see "
Adding an ACL ."
3. Configuring a rule for a WLAN-AP ACL Required.
Recommended IPv6 basic ACL configuration procedure
IPv6 basic ACLs match packets based only on source IP addresses.
To configure an IPv6 basic ACL:
Step Remarks
1. Adding a time range
Optional.
A rule referencing a time range takes effect only during the
specified time range.
2. Add an IPv6 basic ACL
Required.
For more information, see "
Adding an IPv6 ACL ."
3. Configuring a rule for an IPv6 basic ACL Required.
Recommended IPv6 advanced ACL configuration procedure
IPv6 advanced ACLs match packets based on the source IPv6 addresses, destination IPv6 addresses,
packet priorities, protocols carried over IPv6, and other protocol header fields such as the TCP/UDP
source port number, TCP/UDP destination port number, ICMPv6 message type, and ICMPv6 message
code.
Compared to IPv6 basic ACLs, IPv6 advanced ACLs allow more flexible and accurate filtering.
To configure an IPv6 advanced ACL: