H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 359)

338
Item Description
Service Description
Specify a description for the wireless service.
By default, no description is specified for a wireless service.
The same wireless service can be configured for different WLAN IDs.
Specify a description to distinguish between different functions of the
wireless service.
VLAN (Untagged)
Enter the ID of the VLAN whose packets are to be sent untagged. VLAN
(Untagged) indicates that the port sends the traffic of the VLAN with the
VLAN tag removed.
Default VLAN
Set the default VLAN of a port.
By default, the default VLAN of all ports is VLAN 1. After you set the
new default VLAN, VLAN 1 is the ID of the VLAN whose packets are to
be sent untagged.
Delete VLAN
Remove the IDs of the VLANs whose packets are to be sent untagged
and tagged.
SSID Hide
• Enable—Disable the advertisement of the SSID in beacon frames.
• Disable—Enable the advertisement of the SSID in beacon frames.
By default, the SSID is advertised in beacon frames.
IMPORTANT:
• If the advertisement of the SSID in beacon frames is disabled, the
SSID must be configured for the clients to associate with the AP.
• Disabling the advertisement of the SSID in beacon frames does not
improve wireless security.
• Enabling the advertisement of the SSID in beacon frames allows a
client to discover an AP more easily.
Configuring advanced settings for the clear-type wireless service
1. Select Wireless Service > Access Service from the navigation tree.
2. Click the icon for the target clear-type wireless service.