H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 919
898
Figure 958 Adding an available network service
6.
Configure the network service as described in
Table 290 Configuration items
Item Description
Destination IP
Enter the destination address of the network service.
Subnet Mask
Enter the subnet mask of the network service.
Protocol
Specify the protocol type of the network service, which can be IP, TCP, or UDP.
Description
Enter a description for the network service.
If you have configured the system to show network services by description, H3C
recommends that you include the network services' network information (subnet
IP/mask) in the description so that users can view desired information after they
log in to the SSL VPN system.
7.
Click Apply to add the network service to the network service list.
8.
Repeat steps 5 to 7 to add multiple network services.
9.
Click the Add button under the shortcuts list to enter the page for adding a network service shortcut.
Figure 959 Adding a network service shortcut
10.
Enter a name for the shortcut and specify the Windows command of the shortcut.
11.
Click Apply to add the shortcut to the shortcut list.
12.
Repeat steps 9 to 11 to add multiple shortcuts.
13.
Click Apply at the bottom of the Add Host Resource page.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module