H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 158)

137
3. Click Add.
The Add SNMP Group page appears.
Figure 95 Creating an SNMP group
4. Configure SNMP group settings as described in Table 56 .
5. Click Apply.
Table 56 Configuration items
Item Description
Group Name Set the SNMP group name.
Security Level
Select the security level for the SNMP group:
• NoAuth/NoPriv—No authentication no privacy.
• Auth/NoPriv—Authentication without privacy.
• Auth/Priv—Authentication and privacy.
Read View Select the read view of the SNMP group.
Write View
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write operations to all MIB
objects on the device.
Notify View
Select the notify view of the SNMP group. The notify view can send trap messages.
If no notify view is configured, the agent does not send traps to the NMS.
ACL
Associate a basic ACL with the group to restrict the source IP address of SNMP
packets. You can configure to allow or prohibit SNMP packets with a specific source
IP address to restrict the intercommunication between the NMS and the agent.
Configuring an SNMP user
1. Select Device > SNMP from the navigation tree.
2. Click the User tab.
The user tab page appears.