Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 236
215
The AC forwards messages between DHCP clients and the DHCP server.
Figure 186 Network diagram
Configuration procedure
Because the DHCP relay agent and server are on different subnets, you must configure a static route or
dynamic routing protocol so they can communicate.
1.
Enable DHCP:
a.
Select Network > DHCP from the navigation tree.
b.
Click the DHCP Relay tab.
c.
Select the Enable option for DHCP Service.
d.
Click Apply.
Figure 187 Enabling DHCP
2.
Configure a DHCP server group:
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module