H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 386

365

Figure 347 Configuring source IP address verification

Select IPv4 or IPv6 for IP Verify Source. By default, the source IP address verification function is
disabled.

Click Apply.

NOTE:
•

For a client using an SSID configured with source IP address verification, if it accesses the network through AP
local authentication, the source IP address verification feature is effective but the IP-MAC binding entry for the

client cannot be displayed on the AC. For more information about local authentication, see "

Configuring an

authentication mode

•

If the client needs to roam to an AP of another AC in the roaming group, the AC to which the client roams must

be configured with source IP address verification for the specified SSID. Otherwise, the client connection is lost.

For more information about AP local authentication and WLAN roaming, see "Configuring WLAN roaming".

This manual is related to the following products:

H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module