H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 584)

563
2. Click Add.
Figure 590 RADIUS scheme configuration page
3. Enter a scheme name.
4. Select a server type and a username format.
Table 182 Configuration items
Item Description
Server Type
Select the type of the RADIUS servers supported by the device:
• Standard—Standard RADIUS servers. The RADIUS client and server
communicate by using the standard RADIUS protocol and packet format
defined in RFC 2865/2866 or later.
• Extended—Extended RADIUS servers, usually running on IMC. The
RADIUS client and server communicate by using the proprietary RADIUS
protocol and packet format.
Username Format
Select the format of usernames to be sent to the RADIUS server.
Typically, a username is in the format of userid@isp-name, of which isp-name
is used by the device to determine the ISP domain to for the user. If a RADIUS
server does not accept a username that contains an ISP domain name,
configure the device to remove the domain name of a username before
sending it to the RADIUS server.
• Original format—Configure the device to send the username of a user on
an "as is" basis.
• With domain name—Configure the device to include the domain name in a
username.
• Without domain name—Configure the device to remove the domain name
from a username.