H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 205
184
c.
Enter the VLAN ID 100.
d.
Click Apply.
Figure 152 Creating VLAN 100
2.
Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as untagged members of VLAN
100:
a.
Click the
icon of VLAN 100 to enter its configuration page.
b.
Select the Untagged Member option for GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2,
as shown in
.
c.
Click Apply.
Figure 153 Adding a port to the VLAN
3.
Enable IGMP snooping globally:
a.
Select Network > IGMP snooping from the navigation tree to enter the basic configuration
page.
b.
Select the Enable option for IGMP Snooping.
c.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module