Verifying the configuration, Multicast optimization configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 827
806
d.
Select the Binding VLAN pool option and select the target VLAN pool from the Binding VLAN
pool list.
e.
Click Bind.
Figure 853 Binding a VLAN pool to a wireless service
6.
Enable 802.11n(2.4GHz) radio:
a.
Select Radio > Radio Setup from the navigation tree.
b.
Select the box to the left of ap with the radio mode 802.11n(2.4GHz).
c.
Click Enable.
Verifying the configuration
•
Select Advanced > VLAN Pool from the navigation tree to display the number of clients in each
VLAN in the VLAN pool.
•
Select Summary > Client from the navigation tree, click Details, and click the target client to display
the VLAN to which the client belongs.
Multicast optimization configuration example
Network requirements
As shown in
, enable multicast optimization for the AP to convert multicast packets to unicast
packets for up to two clients.
Enable IGMP snooping on the AC before enabling multicast optimization and configure the aging time
of multicast optimization entries to be greater than the aging time of IGMP snooping dynamic member
ports.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module