H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 713)

692
3. Configure SVP mapping, as described in Table 226 .
4. Click Apply.
Table 226 Configuration items
Item Description
AP Name Displays the selected AP.
Radio Displays the selected AP's radio.
SVP Mapping
Select the option before SVP Mapping, and then select an access category for SVP
service:
• AC-VO.
• AC-VI.
• AC-BE.
• AC-BK.
NOTE:
SVP mapping is applicable only to non-WMM clients.
Setting CAC admission policy
1. Select QoS > Wireless QoS from the navigation tree.
By default, the Wireless QoS tab is displayed.
2. Click the icon in the Operation column for the desired AP to enter the page for setting CAC
admission policy, as shown in
Figure 441 .
Figure 720 Setting CAC admission policy
3. Configure the CAC admission policy, as described in Table 227 .
4. Click Apply.
Table 227 Configuration items
Item Description
Client Number
Users-based admission policy, or the maximum number of clients allowed to be
connected. A client is counted only once, even if it is using both AC-VO and AC-VI.
By default, the users-based admission policy applies, with the maximum number of
users being 20.