Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 532
511
Figure 544 Network diagram
Configuration procedure
1.
Before you configure automatic power adjustment, configure AP 1 through AP 4 on the AC to
establish a connection between the AC and each AP.
For the related configuration, see "
."
2.
Configure automatic power adjustment:
a.
Select Radio > Calibration from the navigation tree.
b.
Click the Parameters tab.
c.
Select Auto from the Dynamic Power Select list.
d.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module