H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 423)

402
Figure 410 Adding an access device
2. Add service:
a. Click the Service tab.
b. Select User Access Manager > Service Configuration from the navigation tree.
c. Click Add.
d. On the page that appears, set the Service Name to dot1x, select the Certificate Type as
EAP-PEAP AuthN, select the Certificate Sub-Type as MS-CHAPV2 AuthN, and click Apply.
Figure 411 Adding a service
3. Add an account:
a. Click the User tab.
b. Select User > All Access Users from the navigation tree.
c. Click Add.