H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 192
171
Figure 139 Adding GigabitEthernet 1/0/1 to VLAN 100
3.
Configure VLAN-interface 100 and its IP address:
a.
Select Device > Interface from the navigation tree.
b.
Click Add.
c.
On the page that appears, select Vlan-interface from the Interface Name list, and enter 100,
select the Static Address option for IP Config, enter 192.168.1.2 for IP Address., and select 24
(255.255.255.0) for Mask.
d.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module