Configuring an internal server, Creating an address pool – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 288
267
Table 97 Static NAT configuration task list
Task Remarks
Creating a static address mapping
Required.
Static NAT supports two modes, one-to-one and net-to-net.
Enabling static NAT on an interface
Required.
Configure static NAT on an interface.
Configuring an internal server
Task Remarks
Configuring an
internal server
Required.
After you map the private IP address/port number of an internal server to a public IP
address/port number, hosts in external networks can access the server located in the
private network.
Optional.
The DNS mapping feature enables an internal host to use the domain name to access
an internal server located on the same private network, while the DNS server resides
on the public network.
Creating an address pool
1.
From the navigation tree, select Network > NAT.
The Dynamic NAT page appears.
Figure 240 Dynamic NAT
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module