H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 309)

288
g. Enter 192.168.1.2 for Internal IP.
h. Select ftp for Service Type.
i. Click Apply.
Figure 268 Adding an internal FTP server
SIP ALG configuration example
Network requirements
As shown in Figure 269 , a company uses the private network segment 192.168.1.0/24, and has four
public network addresses: 5.5.5.1, 5.5.5.9, 5.5.5.10, and 5.5.5.11. SIP UA 1 is on the internal network
and SIP UA 2 is on the outside network.
Configure NAT and ALG on the AC so that SIP UA 1 and SIP UA 2 can communicate by using their
aliases. SIP UA 1 selects an IP address from the range 5.5.5.9 to 5.5.5.11 when registering with the SIP
server on the external network.
Figure 269 Network diagram
Configuration procedure
1. Enable ALG for SIP. (By default, ALG is enabled for SIP, and this step can be skipped.)
a. Select Network > ALG from the navigation tree.
b. Add sip to the Selected Application Protocols list, as shown in Figure 270 .