H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 397)

376
Figure 357 Network diagram
Configuration guidelines
Select a correct district code.
Configuring the AC
1. Create an AP:
a. Select AP > AP Setup from the navigation tree.
b. Click Add.
c. On the page that appears, set the AP name to ap, select the AP model WA3628i-AGN, select
Manual from the Serial ID list, and enter the serial ID of the AP.
d. Click Apply.
Figure 358 Creating an AP
2. Configure a wireless service:
a. Select Wireless Service > Access Service from the navigation tree.
b. Click Add.
c. On the page that appears, set the service name to service1 and select the wireless service type
Clear.
d. Click Apply.
Figure 359 Creating a wireless service
3. Enable the wireless service:
a. Select Wireless Service > Access Service from the navigation tree.
b. On the page that appears, select service1 and click Enable.