H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 889
868
Figure 924 Configuring an IKE peer
5.
Configure an IPsec policy:
a.
From the navigation tree, select VPN > IPSec.
b.
Click the Policy tab.
c.
Click Add.
d.
Enter the policy name map1.
e.
Enter the sequence number 10.
f.
Select the IKE peer peer.
g.
Select the IPsec proposal tran1 and click <<.
h.
Enter the ACL number 3101.
i.
Select Enable for RRI.
j.
Enter the next hop address 2.2.2.2.
k.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module