H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 414)

393
Figure 392 Enabling 802.11n(2.4GHz) radio
Configuring the RADIUS server (IMC v3)
The following example uses the IMC (IMC PLAT 3.20-R2602 and IMC UAM 3.60-E6102) to illustrate the
basic configuration of the RADIUS server.
To configure the RADIUS server:
1. Add an access device:
a. Click the Service tab in the IMC Platform.
b. Select User Access Manager > Access Device Management from the navigation tree.
c. Click Add.
d. On the page that appears, enter expert as the Shared Key, enter 1812 and 1813 as the port
number for authentication and accounting, respectively, select LAN Access Service as service
type, select H3C as the access device type, select or manually add the access device with the
IP address 10.18.1.1, and click Apply.
Figure 393 Adding access device
2. Add service:
a. Click the Service tab.
b. Select User Access Manager > Service Configuration from the navigation tree.
c. Click Add.
d. On the page that appears, set the service name to mac, keep the default values for other
parameters, and click Apply.